- Successful completion of Machine Shop Course required BEFORE using Shop.
- Machine Shop Employee MUST BE PRESENT at all times that equipment is in use.
- DO NOT USE A MACHINE if ANY DOUBT about operation or safety. If Safety Officer has any concern about your knowledge of equipment use/safety, your session will be ended immediately.
- All Shop tools MUST be handled in a safe manner.
- REPORT safety problems/concerns to David Williams, Shop Supervisor.
- Safety glasses MUST be worn at all times.
- Loose fitting clothing is NOT allowed when operating Shop equipment.
- Long hair MUST be restrained in such a manner so as not to be a safety hazard.
- Work areas must be kept clean and free of debris.
- All tools must be cleaned and replaced after each use.
- All machines must be cleaned after each use.
- After-hours use is temporarily unavailable (7/1/2019).
- Non SCS Personnel Rate is $28.00 per hour (tools and tooling provided)
- Only work related to University projects may be performed in the Shop.
For appointment contact shop via email at: scs-machineshop@illinois.edu, or by phone: 217-300-6618.